D-Option MCP connects your Meta, Google Ads, Search Console and Google Analytics 4 accounts to Claude. Ask the way you'd ask a teammate. Claude answers with your brand's history, recent account changes and on-site results already factored in.
Read-only access to Meta, Google Ads, Search Console and GA4. It never changes a setting in your accounts.
Your historical data comes along on day one, so Claude knows your brand's track record from the very first question.
It works out what normal looks like for your brand: typical performance, peer campaigns with the same goal, how long your creatives usually last. Every number is read in that light.
Checks run in the background all day long: unusual swings, measurement gaps and changes made in your accounts.
Ask your question. Claude pulls the data it needs and shows exactly what it looked at.
Book a demoWe handle setup and bring in your historical data.
MetaGoogle AdsSearch ConsoleGA4
live
Cost per purchase
ClaudeThe cost spike lines up with the Oct 6 budget increase. Two new ads went live the same day, so the effect can't be pinned on just one change.Meta Ads · Oct 5-11
Cost per purchaseNormal rangeAccount changeUnusual
01 / 05
Four sources, read-only
Scroll to watch the chart gain contextMeta · Google Ads · Search Console · GA4
Connected sources
Meta AdsCampaign and ad metrics, creatives, account change history
Google AdsCampaign and ad metrics, creatives, campaign settings, change history
Search ConsoleOrganic queries with clicks, impressions, CTR and average position
Google Analytics 4Sessions, engagement, conversions and revenue; on-site behavior by campaign, plus landing pages for ad traffic
Context layer
Every number arrives with context.
Claude doesn't get a raw table dump. D-Option MCP continuously processes your brand's history, account changes and check results, so Claude comes to every question with that brand memory.
Change history
When performance shifts, it checks what changed in the account.
Budget, bid strategy, targeting, ad and status changes come straight from the account logs. It compares the periods before and after each change and calls out anything else that changed the same day.
Sep 14 · Google AdsSearch: bid strategyMaximize conversionsTarget CPA
Plus 1 budget change the same day
Anomalies
Flags anything that falls outside your normal range.
What counts as unusual is judged against your brand's own history, not an industry average. Scans run all day.
Creative lifespan
Measures every creative against your own track record.
Shows which phase each creative is in, based on how long your creatives in the same channel and format usually last.
Ads and site
Puts what the platform reports next to what your site saw.
Campaigns are matched to their GA4 counterparts, so platform-reported results and on-site results are read side by side.
revenue / spend · last 30 days
Meta4.2
GA42.6
The gap usually comes down to attribution. Read the two side by side; never add them up.
Organic search
Reads paid and organic search together.
Spend on branded search is weighed against your organic visibility in Search Console.
Query
Clicks
Impr.
Pos.
your brand
4,812
11,430
1.1
your brand sale
1,207
4,880
1.4
winter coats
310
24,800
8.4
Sample conversation
Follow one question all the way through.
Claude shows which data it checks at every step. Numbers come with their source, and anything uncertain gets called out.
01
Spot the shift
See how much cost went up and where that sits against your brand's normal range.
02
Find the source
See which campaign is driving it and what changed in the account at the time.
03
Check the site
Use GA4 to see how ad traffic behaved once it hit your site. The call is still yours.
ClaudeD-Option MCP connected
Why did our Meta cost per purchase go up last week?
Claude
account_context · Meta, last 7 days
funnel_breakdown · account-wide
Cost per purchase went from $31 to $41 in a week. That's above your brand's normal range.
Cost per purchase$41+31%
Spend$18,240+18%
Purchases450−10%
Spend went up while purchases went down. Want me to check which campaign is behind it?
Source: Meta Ads · Oct 5-11 vs. prior 7 days
Which campaign is driving it?
Claude
list_account_changes · Meta, last 14 days
get_change_impact · Prospecting
Most of the increase comes from Prospecting. Retargeting is within its normal range.
Prospecting$35 → $51
Retargeting$19 → $20
Oct 6 · Meta · ProspectingDaily budget $400 → $6502 new ads also went live that day.
The cost increase lines up with these changes. Since more than one change landed the same day, the effect can't be pinned on any single one.
What does it look like on the site?
Claude
campaign_site_quality · Prospecting
landing_page_performance · Oct 5-11
In GA4, engagement rate for sessions from this campaign dropped from 58% to 41%. The drop is concentrated on the landing page the new ads point to.
Engagement rate41%−17 pts
Sessions16,920+24%
Conversion rate1.9%−0.8 pts
Two options worth weighing: point the new ads back to the previous landing page, or roll the budget back and watch for a week. Your call; D-Option MCP doesn't make changes in your account.
Source: Google Analytics 4 and Meta Ads · Oct 5-11
Ask Claude anything
Sample conversation. Campaign names and numbers are illustrative.
How it works
Where your data comes from, and what happens next.
You connect once. From then on, data is collected every day and processed for your brand alone. Claude only reads what it needs, and only when you ask.
History includedYour historical data comes in the day you connect, so comparisons work from the first question.
Always currentData refreshes every day, and checks run continuously throughout the day.
Change logs build upAccount change history starts accumulating once you connect. The longer it runs, the sharper the comparisons get.
Sample questions
Just ask what's on your mind.
Pick a question to see which tool Claude uses and which data it reads to answer.
Analysis principles
When the data falls short, it says so.
D-Option MCP also tells Claude what the data can and can't show. The goal isn't to answer every question no matter what; it's to give the answer the data actually supports.
Never treats unmeasured as zero
If a campaign's conversions aren't being measured, it won't report zero conversions, and it won't calculate CPA or ROAS.
This campaign drove zero sales.
Sales weren't measured for this campaign.
Doesn't mistake timing for cause
If performance moved after an account change, it won't present that change as the definitive cause.
The budget increase caused the drop.
The drop lines up with the budget increase.
Doesn't pin it on one change
When several changes land the same day, it says so and won't attribute the effect to just one.
The new creative drove the lift.
Three changes landed the same day; their effects can't be separated.
Avoids assumptions
If something isn't in the records, it won't claim it didn't happen. Without enough data, it won't force a comparison.
No changes were made to the account.
No changes show up in the records for this period.
Who it's for
Built for everyone, from specialists to CMOs.
Performance teams
Figure out what changed with a few questions, before you build the weekly report.
Why did our Google cost per click go up this week?
Agencies
Each client brand connects separately, and each connection only sees that brand's data.
Which campaign's costs grew the most for this brand last month?
SEO teams
Connect Search Console and GA4 on their own. No ad account required.
How have organic clicks changed over the last four weeks?
Marketing leaders
Ask without opening a dashboard or waiting on a report, and get answers that cite their sources.
Which channel was more efficient this month?
Security
It reads and reports. It never changes a setting.
D-Option MCP can't change budgets, bids or campaign settings in your ad accounts. Claude can make recommendations; reviewing and acting on them stays with you.
Read-only by design
No tool writes to your ad accounts. Budgets, bids, targeting and campaign status are read, never edited. The only thing it ever saves is a note in the findings log inside D-Option.
Each brand sees only its own data
Every brand connects through its own address, and one brand's data can never be read through another brand's connection.
Sign in with your D-Option account
New connections sign in with your D-Option account when you add the connector to Claude. Each connection only opens its own brand's data.
Revoke access anytime
Remove the access you've granted in Meta, Google Ads, GA4 and Search Console whenever you like, and delete the connector from Claude. You can also ask us to delete your stored data.
Getting started
Up and running in three steps.
We handle the technical setup. All we need from you is access to your accounts.
01
Grant access
Give us read access to your ad, Search Console and GA4 accounts. We'll walk you through each step during setup.
Meta Ads
Google Ads
Google Analytics 4
Search Console
02
We set it up
We connect your accounts to your brand and bring in your historical data. Brand memory and checks are built from it.
Ad metricsimported
GA4imported
Creativesready
Brand memoryready
03
Add it to Claude
In Claude, open Connectors, add a custom connector, paste the address we give you and sign in with your D-Option account.
Your plan depends on your ad account count and monthly ad spend, with custom quotes for larger setups.
We never take a cut of your ad spend.
Setup and historical data import come with every plan.
Volume discounts for agencies.
FAQ
Questions, answered
What is D-Option MCP?
It's an MCP server that connects your Meta, Google Ads, Search Console and Google Analytics 4 data to Claude, so Claude can answer your questions with your brand's current data, history and account changes in view.
MCP (Model Context Protocol) is an open standard that lets AI assistants like Claude connect to outside data sources.
Which Claude plan do I need?
Custom connectors work on every Claude plan, including Free. The Free plan is limited to one custom connector, so if you're connecting several brands or running long analyses, Pro, Max, Team or Enterprise is a better fit.
On Team and Enterprise plans, an Owner adds the custom connector first; team members then connect with their own accounts.
Can it make changes to my ad accounts?
No. D-Option MCP only reads your ad accounts. Claude can suggest budget, bid or targeting changes based on the data; whether to act on them is up to you.
How often is the data updated?
Ad, GA4 and Search Console data refreshes every day, and scans for unusual movements run throughout the day. Platforms sometimes revise the last few days of data, so the most recent days may not be final yet.
Does my historical data come with it?
Yes. Your historical ad and GA4 data is imported during setup, so Claude can compare against your brand's history from the very first question. Account change history starts building up once you connect.
Can I connect multiple brands as an agency?
Yes. Each brand gets its own connection address, and each connection only sees its own brand's data. You add a separate connector in Claude for each brand, and agency discounts kick in as you add brands.
Can I use it with just Search Console and GA4?
Yes. You can use it for organic search and site data without connecting any ad accounts. Get in touch and we'll put together a quote that fits.
Where is my data stored?
Data is stored on servers run by our hosting provider, Render, in the United States (Oregon). Each brand can only access its own data. Our Privacy Policy covers what we store, why and for how long.
Contact
See it working on your own accounts.
Tell us a bit about your team and we'll set up a walkthrough. We'll look at your account setup together and talk through how D-Option MCP would fit your workflow.
We handle setup and bring in your historical data.
Built for agencies, too: multi-brand setups with volume pricing.
Read-only. It never changes a setting in your accounts.